1. Study of the main forces
|
2. Joining the panel of the wing pattern
|
3. Study vector forces |
.
4. Details on the use of horizontal strips |
5. Gluing templates panels from sheets of A4 |
6. Ready templates panels.
|
7. All panels ready for sewing. Sorting by the panel number. |
8. The balance of the panel of the wing pattern and prepare a joint cross-linking pattern. |
9. Panel stitched by color
|
10. Since the Gelvenor fabric is impregnated with silicone, it is very slippery.
Therefore, pre-fix needles. |
11. Details panel sews straight stitch |
12. Sews two parts of the panel
|
13. Sewing details. Staple wing ribs on the left and right panel
|
14. Rigifoil and sew pockets details
|
15. Template for a cut of the gains under the loop |
16. The fabric cut out the soldering iron on the pattern. |
17. Ready-made pockets for nylons |
18. Reinforcements using Oxford 300
|
19. Reinforcements in Zone "A" |
20. Reinforcements using cross-linked strips of Oxford 300
|
21. Sewing pockets and loops. |
22. Sewing pockets |
23. Sewing loops at "A"
|
24. Sewing loops
|
25. Sewing loops
|
26. Reinforcement of the front edge of the panel (1)
|
27. Reinforcement of the front edge of the panel (2) |
28. Reinforcement of the front edge of the panel (3) |
29. Reinforcement of the front edge of the panel (4) |
30. Ready half of the wing (November 2015)
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
