le-ge

  HEGALA 14 v2
Soaring miniwing and parakite

By  Tim Weber (Germany) https://www.instagram.com/thermik_timmy/

( Based in Hegala v2 prototype )

HEGALA V2 description by

..Two years ago i really enjoyed building the BHL5 16m2 and now I wanted to build a new wing. After thinking of the Hegala i asked Pere if i can get the actual plans of the wing. He connected me with Eric Fontaine and Marcel (Acromaxx). They both helped me a lot and now i am able to present you my prototype of the Hegala V2 Parakite!

It was a fun project sewing my first doubleskin wing. And it's definitely not the last!

The Hegala V2 with kite riser (22 cm difference A/C) is a pretty fast wing and fun to fly.
The speed of the wing can get dangerous and i really suggest to fly this wing only as an experienced pilot!

Materials used :

Serafil 60 TeX 45

Porcher Skytex 32 hard for the inner structure

Porcher Skytex 32 and 38 for the cells

PSP Kite Repair Tape for diagonal reinforcement

10mm polyester belt for line attachment

Lines: Edelrid 8001 340kg, 120kg

Risers : Liros D-PRO STATIC DM20 4mm /5mm
Ronstan Orbit 20mm pulleys

Thanks at Pere, Eric and Marcel for the support!


Kite Risers, difference between A and C is 22cm full accelerated

Here is a detailed description of the parakite risers
Sat, 30/8/25, 11:31


Line Set finished
Sat, 30/8/25, 11:31


Canopy finished
Sat, 30/8/25, 11:31


Trailing edge
Sat, 30/8/25, 11:31


All lines are measured under 5kg load
Sat, 30/8/25, 11:31


Edelrid 8001 340kg for lower lines, 120kg for gallery lines
Sat, 30/8/25, 11:31


Leading edge
Sat, 30/8/25, 11:31

Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Kite Risers, difference between A and C is 22cm full accelerated
Sat, 30/8/25, 11:31


Leading edge sewing
Sat, 30/8/25, 11:31

Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Line Set finished
Sat, 30/8/25, 11:31


Trailing edge seems to be good
Sat, 30/8/25, 11:31


These little helpers are worth gold
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Trailing edge
Sat, 30/8/25, 11:31


Minirib backstich reinforcement
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
All lines are measured under 5kg load
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Edelrid 8001 340kg for lower lines, 120kg for gallery lines
Sat, 30/8/25, 11:31


Folding pocket for nylon rod
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Leading edge
Sat, 30/8/25, 11:31


Nylon rod pocket
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Canopy finished
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31


My choice of needle
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31

Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Leading edge sewing
Sat, 30/8/25, 11:31


Diode Laser 10Watt output
Sat, 30/8/25, 11:31


Skytex 32hard for the inner parts of the wing and Skytex 32 for the cells
Sat, 30/8/25, 11:31


Diagonals ready to sew
Sat, 30/8/25, 11:31


10mm belt for line attachment
Sat, 30/8/25, 11:31


Diagonal downside reinforced and cut
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
These little helpers are worth gold
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Trailing edge seems to be good
Sat, 30/8/25, 11:31


Ripstop Tape for diagonal reinforcement
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Folding pocket for nylon rod
Sat, 30/8/25, 11:31


Skytex 38 for the blue part of the wing
Sat, 30/8/25, 11:31


Ripstop Mosaik :D
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Minirib backstich reinforcement
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Nylon rod pocket
Sat, 30/8/25, 11:31

Sat, 30/8/25, 11:31


Cutting speed 3500mm/min on white fabric
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
My choice of needle
Sat, 30/8/25, 11:31


Upgraded Lasercutter 1x3m with suction table
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Diagonals ready to sew
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Diode Laser 10Watt output
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Ripstop Tape for diagonal reinforcement
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Skytex 38 for the blue part of the wing
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Ripstop Mosaik :D
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Cutting speed 3500mm/min on white fabric (32g hard)
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Upgraded Lasercutter 1x3m with suction table
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Skytex 32hard for the inner parts of the wing and Skytex 32 for the cells
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
10mm belt for line attachment
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Diagonal downside reinforced and cut
Sat, 30/8/25, 11:31
[Fitxers multimèdia omesos]
Swoop on Hegala V2
Sat, 30/8/25, 11:36
[Fitxers multimèdia omesos]
Happiness is homemade ❤️🪂
Sat, 30/8/25, 11:36
[Fitxers multimèdia omesos]
Swoop on Hegala V2
Sat, 30/8/25, 11:37
[Fitxers multimèdia omesos]
Happiness is homemade ❤️🪂
Sat, 30/8/25, 11:37
[call (attempt)]
Sat, 30/8/25, 11:39


Hegala finally in the air
Sat, 30/8/25, 11:39

Sat, 30/8/25, 11:39
1
Video Hegala finally in the air
Sat, 30/8/25, 11:39